Areas of expertise
Divako manages any device, anywhere - but we're especially good at these five.
We run a platform that handles almost any IoT setup - meters, streetlights, well levels, overflow probes and industrial sensors. We've built deep workflows, reports and integrations for the segments where our customers are. Pick the one that sounds like you.
01 · Municipalities & utilities
Water, heat, district energy, electricity - read remotely, delivered on time.
For utilities and municipalities, metering is the foundation under billing, customer service, and loss control. Divako replaces drive-by rounds with continuous remote reading across LoRaWAN, wM-Bus and NB-IoT - and feeds data straight into your billing system on the first of the month.
Leak and back-flow alerts fire the same hour, not the next quarter. Consumption reports and customer-portal data stay in sync with what the meter actually measured.
- End-to-end water, heat and district-energy metering
- Automated billing exports (SFTP, webhook, native connector)
- Leak, backflow and drift detection with alarm routing
- Coverage maps that tell installers where to place gateways
- Resident portal for customer-facing consumption history
02 · Condominiums & housing
Fair cost distribution, without the spreadsheet marathon.
For condominiums, housing associations and building operators, Divako turns per-apartment metering into a single reliable workflow. Cold water, hot water, heat and electricity all land in the same data model - and the resident portal turns it into numbers people can understand.
The board gets an exportable cost-distribution run. Residents get a clean view of their own consumption, with year-over-year comparisons that nudge them toward smaller bills. Everyone gets one source of truth.
- Per-apartment cost distribution across cold, hot, heat, electricity
- Resident portal with year-over-year trend
- Anomaly alerts for vacant, leaking or stuck meters
- Board-facing reports and export to accounting
- Onboarding in weeks, not quarters
03 · Business & industry
OT + IT data, in the same pipeline.
For production sites, campuses and industrial properties, the hard problem is often "how do we get our Modbus PLCs, our OPC UA endpoints and our LoRaWAN sensors into the same place?" Divako answers that. Every source becomes a normalised measurement stream that your ERP, SCADA, BI or data warehouse can consume.
Energy teams get usable numbers on day one. Ops teams stop maintaining bespoke bridges. Procurement stops worrying about vendor lock-in.
- Modbus, OPC UA, LoRaWAN and MQTT side by side
- Native connectors to ERP, SCADA, BI and warehousing
- Energy, water and process metrics in one stream
- Role-based access with SSO / SCIM
- On-prem bridge options for air-gapped sites
04 · Streetlights & smart city
Light Control Management - profiles, schedules and dimming for every street.
For cities and road authorities, Divako runs streetlight networks end to end. Build profiles in 16 switching slots, mix clock-based and astronomical rules (sunrise/sunset with offsets), and push schedules to thousands of luminaires through a single LoRaWAN multicast - one downlink per group, not one per device.
The platform watches every fixture in the background. Drift detection compares actual relay state against the expected schedule every 30 minutes; if a light is off when it should be on, Divako queues an immediate correction and, after repeated misses, automatically resends device setup. Operators see per-device sync status as colour-coded dots on the dashboard.
- Hierarchical groups with profile inheritance (mirror to subgroups)
- Yearly profile assignments with date-range coverage timeline
- Astronomical clock with per-device location resolution
- Multicast downlinks via ChirpStack, unicast where needed
- Per-relay dimming (0-100 %), lock-out windows, manual override
- Drift detection & auto-correction; manual resend from the field
- Per-device read of current profile + expected-vs-actual comparison
05 · Water networks & overflow
Leveling and overflow - wells, tanks, pump stations and wastewater.
For water utilities and wastewater operators, the network doesn't stop at the customer meter. Divako monitors levels in wells, tanks, reservoirs and pumping stations, and detects overflow events on combined sewers and storm outlets - all in the same dashboards as your consumption metering.
Set a four-tier threshold per device - HH (high-high), H, L and LL (low-low) - and the platform colour-codes status, fires alarms, and writes an event row for every overflow. Each event tracks start time, end time, duration and the threshold that triggered it; sparkline charts make the trend obvious at a glance.
- Continuous level monitoring with per-device sensor calibration
- Four-tier alarm thresholds (HH / H / L / LL) per meter or group
- Overflow event detection: start, end, duration, peak above threshold
- Map view with live status; sparkline trend per device
- Alarm routing to email, webhook, MQTT or existing incident system
- Integrates with the same billing and reporting flows as consumption
Get started
Not sure which bucket you fit in?
Tell us what you want to read or measure - we'll tell you within a week whether we can help, and what it would take.